Flex-100 Series Controller Modules: Negative
input control voltage. (Non-Inverting)
|
| Part Number |
Shutdown Voltage |
Short Description |
Typical Uses, System Type |
|
100X02R6 |
-2.6V |
Standard model. Requires only one power supply.
Generates own negative and logic voltages. Provides sequential or
independent gate and drain switching. |
For systems with preference for negative control
signals. The controller can operate single or multiple switch module(s)
with up to 300mA MOS gate load. Also has alternative TTL output drive.
Use with 300 & 400 series switch modules for CW and pulsed applications.
Comes in gate thresholds of -2.6V, -2.0V, & -1.4V for transistor
shutdown. |
|
100X02R0 |
-2.0V |
|
100X01R4 |
-1.4V |
| |
|
|
|
100T02R6 |
-2.6V |
Same as standard model above, but with optional terminal pins. |
|
100T02R0 |
-2.0V |
|
100T01R4 |
-1.4V |
|
|
|
|
100L02R6 |
-2.6V |
Same as standard model, but has low height profile of
0.20". Castelated ports have 60mil pitch. Not all ports are at single
edge as above models. |
|
100L02R0 |
-2.0V |
|
100L01R4 |
-1.4V |
| |
|
|
|
|
120X02R6 |
-2.6V |
Sub-model. No gate voltage switching; only drain. Gate
bias voltage is fixed. Requires only one supply. Generates own negative
and logic supplies. |
Same as above except no gate switching capability.
Lower cost alternative for systems that only require a fixed gate
voltage bias. |
|
120X02R0 |
-2.0V |
|
120X01R4 |
-1.4V |
| |
|
|
|
120T02R6 |
-2.6V |
Same sub-model above with optional terminal pins. |
|
120T02R0 |
-2.0V |
|
120T01R4 |
-1.4V |
| |
|
|
|
120L02R6 |
-2.6V |
Same sub-model above, but has low height profile of
0.20". Ports have 60mil pitch. |
|
120L02R0 |
-2.0V |
|
120L01R4 |
-1.4V |
| |
|
|
|
|
124X02R6 |
-2.6V |
Sub-model. Basic sequencer/modulator. No gate switching;
only drain. Has no voltage inverter, nor logic supply. All DC supplies
are provided by user. |
Same as above without the extra features as previously
described. This low cost sub-model is ideal for systems that only need a
bare-bones transistor protection and drain switching capability. |
|
124X02R0 |
-2.0V |
|
124X01R4 |
-1.4V |
| |
|
|
|
124T02R6 |
-2.6V |
Same sub-model above with optional terminal pins |
|
124T02R0 |
-2.0V |
|
124T01R4 |
-1.4V |
| |
|
|
|
124L02R6 |
-2.6V |
Same sub-model above, but has low height profile of
0.20". Ports have 60mil pitch. |
|
124L02R0 |
-2.0V |
|
124L01R4 |
-1.4V |
| |
|
|
|
Flex-200 Series Controller Modules: Positive
input control voltage for negative gate bias voltage (inverting)
|
| Part Number |
Shutdown Voltage |
Short Description |
Typical Uses, System Type |
| |
|
|
|
|
200X02R6 |
-2.6V |
Standard model. Requires only one power supply.
Generates own negative and logic voltages. Provides sequential or
independent gate and drain switching. |
For systems with preference for positive control
signals. The controller can operate single or multiple switch module(s)
with up to 300mA MOS gate load. Also has alternative TTL output drive.
Use with 300 & 400 series switch modules for CW and pulsed applications.
Comes in gate thresholds of -2.6V, -2.0V, & -1.4V for transistor
shutdown. |
|
200X02R0 |
-2.0V |
|
200X01R4 |
-1.4V |
| |
|
|
|
200T02R6 |
-2.6V |
Same as standard model above, but with optional terminal
pins. |
|
200T02R0 |
-2.0V |
|
200T01R4 |
-1.4V |
| |
|
|
|
200L02R6 |
-2.6V |
Same as standard model, but has low height profile of
0.20". Castelated ports have 60mil pitch. Not all ports are at single
edge as above models. |
|
200L02R0 |
-2.0V |
|
200L01R4 |
-1.4V |
| |
|
|
|
|
220X02R6 |
-2.6V |
Sub-model. No gate voltage switching; only drain. Gate
bias voltage is fixed. Requires only one supply. Generates own negative
and logic supplies. |
Same as above except no gate switching capability.
Cheaper alternative for systems that only require a fixed gate voltage
bias. |
|
220X02R0 |
-2.0V |
|
220X01R4 |
-1.4V |
| |
|
|
|
220T02R6 |
-2.6V |
Same sub-model above with optional terminal pins. |
|
220T02R0 |
-2.0V |
|
220T01R4 |
-1.4V |
| |
|
|
|
220L02R6 |
-2.6V |
Same sub-model above, but has low height profile of
0.20". Ports have 60mil pitch. |
|
220L02R0 |
-2.0V |
|
220L01R4 |
-1.4V |
| |
|
|
|
|
224X02R6 |
-2.6V |
Sub-model. Basic sequencer/modulator. No gate switching;
only drain. Has no voltage inverter, nor logic supply. All DC supplies
are provided by user. |
Same as above without the extra features as previously
described. This low cost sub-model is ideal for systems that only need a
bare-bones transistor protection and drain switching capability. |
|
224X02R0 |
-2.0V |
|
224X01R4 |
-1.4V |
| |
|
|
|
224T02R6 |
-2.6V |
Same sub-model above with optional terminal pins. |
|
224T02R0 |
-2.0V |
|
224T01R4 |
-1.4V |
| |
|
|
|
224L02R6 |
-2.6V |
Same sub-model above, but has low height profile of
0.20". Ports have 60mil pitch. |
|
224L02R0 |
-2.0V |
|
224L01R4 |
-1.4V |
| |
|
|
|
Flex-400 Series Dual Micro Switch Modules:
|
| Part Number |
Short Description |
Typical Uses, System Type |
|
410X0000 |
Standard model. Dual 10A MOS switch for CW applications. |
General CW operation or >500usec pulse width. Narrow
circuit profile for very tight spaces. |
|
410T0000 |
Same as above with optional terminal pins. |
|
410L0000 |
Same as above with low height profile of 0.20". Ports have 60mil
pitch. |
| |
|
|
|
|
420X0000 |
Standard model. Dual 10A MOS switch for pulsed applications. |
General pulsed operation of <500usec pulse width. Narrow
circuit profile for very tight spaces. |
|
420T0000 |
Same as above with optional terminal pins. |
|
420L0000 |
Same as above with low height profile of 0.20". Ports have 60mil
pitch. |
| |
|
|
|
|
430X0000 |
Standard model. Complimentary 10A P&N mos switch for pulsed
applications. |
High speed pulsed operation of <500usec pulse width.
Rise and fall times clock to <200nsec. Narrow circuit profile for very
tight spaces. |
|
430T0000 |
Same as above with optional terminal pins. |
|
430L0000 |
Same as above with low height profile of 0.20". Ports have 60mil
pitch. |
| |
|
|
|
Flex-300 Series Switch
Modules:
|
| Part Number |
Short Description |
Typical Uses, System Type |
| 332P0000 |
Compact 14A switch module for pulsed applications. Stand alone
P-chan unit or complemented with N-chan add-on. |
Current rating is based on best possible heat
dissipation techniques. Typical for CW is <1/2 current rating, while
pulsed is <2/3 current rating. |
| 332N0000 |
Compact 14A switch module add-on only for pulsed applications. To be
utilized only with P-chan unit above. |
| 335PNT |
Compact 14A complementary P-N-chan switch module in a single board.
Rise and fall times clock at <200nsec. |
| |
|
|
|
| 362P0000 |
Compact 40A switch module for pulsed applications. Stand alone
P-chan unit or complemented with N-chan add-on. |
Current rating is based on best possible heat
dissipation techniques. Typical for CW is <1/2 current rating, while
pulsed is <2/3 current rating. |
| 362N0000 |
Compact 40A switch module add-on only for pulsed applications. To be
utilized only with P-chan unit above. |
| 365PNT |
Compact 40A complementary P-N-chan switch module in a single board.
Rise and fall times clock at <200nsec. |
| |
|
|
|
| 392P0000 |
Compact 12A micro switch module for pulsed applications. |
|
| 395PNT |
Compact 12A complementary P-N-chan micro switch module in a single
board. Rise and fall times clock at <200nsec. |
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|