TQP7M9106

Amplifier from Qorvo

Amplifier, High Linearity, .05- 1.5 GHz, 33 dBm, 20.8 dB

TQP7M9106
Amplifier, High Linearity, .05- 1.5 GHz, 33 dBm, 20.8 dB

Manufacturer:	Qorvo
Status:	Standard
Data Sheet:	TQP7M9106 Data Sheet
RoHS Compliance:	Yes

Specifications
Part Number: TQP7M9106
Manufacturer: Qorvo
Status: Standard
Data Sheet: TQP7M9106 Data Sheet
RoHS Compliance: Yes
Type: RF Power MMIC
Frequency Min: 0.05 GHz
Frequency Max: 1.5 GHz
P1dB: 33 dBm
Gain: 20.8 dB
IP3: 50.3 dBm
Supply Voltage \ Vd Max: 5 V
Quiescent Current \ Id: 455 mA
Noise Figure: 4.8 dB
Package: QFN 4x4mm
Return Loss Input: 9.2 dB
Return Loss Output: 12.7 dB

Specifications

Part Number:

TQP7M9106

Manufacturer:

Qorvo

Status:

Standard

Data Sheet:

TQP7M9106 Data Sheet

RoHS Compliance:

Yes

Type:

RF Power MMIC

Frequency Min:

0.05 GHz

Frequency Max:

1.5 GHz

P1dB:

33 dBm

Gain:

20.8 dB

IP3:

50.3 dBm

Supply Voltage \ Vd Max:

5 V

Quiescent Current \ Id:

455 mA

Noise Figure:

4.8 dB

Package:

QFN 4x4mm

Return Loss Input:

9.2 dB

Return Loss Output:

12.7 dB

BY CLICKING ON THE "ACCEPT" BUTTON, “YOU” (MEANING YOU PERSONALLY OR THE COMPANY YOU REPRESENT AND ON WHOSE BEHALF YOU ARE FULLY AUTHORIZED TO ENTER THIS AGREEMENT) ARE CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE "CANCEL" BUTTON AND THE DOWNLOAD/INSTALLATION PROCESS WILL NOT CONTINUE.  IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO THESE TERMS.
1.  GRANT. Subject to the terms of this Agreement, ("Company") hereby grants you (and only you) a limited, personal, non-sublicensable, non-transferable, royalty-free, nonexclusive license to use internally the software that you are about to download/install ("Software") only in accordance with this Agreement and the Company documentation that accompanies the Software and without any modification other than modifications provided directly from Company.
2.  RESTRICTIONS. You may not (and agree not to, and not authorize or enable others to), directly or indirectly: (a) copy, distribute, or otherwise use for the benefit of a third party, the Software; (b) disassemble, or otherwise reverse engineer, the Software; or (c) remove any proprietary notices from the Software. You understand that Company may modify or discontinue offering the Software at any time.
3.  SUPPORT AND UPGRADES. This Agreement does not entitle you to any support, upgrades, patches, enhancements, or fixes for the Software (collectively, "Support"). Any such Support for the Software that may be made available by Company shall become part of the Software and subject to this Agreement.
4.  WARRANTY DISCLAIMER. COMPANY PROVIDES THE SOFTWARE "AS IS" AND WITHOUT WARRANTY OF ANY KIND, AND COMPANY HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY, AND NON-INFRINGEMENT. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS AGREEMENT.
5.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, WITHOUT LIMITATION, TORT, CONTRACT, STRICT LIABILITY, OR OTHERWISE, SHALL COMPANY OR ITS LICENSORS, SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR ANY OTHER PERSON FOR (A) ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER FAILURE OR MALFUNCTION, DAMAGES RESULTING FROM YOUR USE OF THE SOFTWARE OR (B) ANY AMOUNT IN EXCESS OF $100.
6.  TERMINATION. You may terminate this Agreement and the license granted herein at any time by destroying or removing from all computers, networks, and storage media all copies of the Software. Company may terminate this Agreement and the license granted herein immediately if you breach any provision of this Agreement. Upon receiving notice of termination from Company you will destroy or remove from all computers, networks, and storage media all copies of the Software. Sections 2 through 7 shall survive termination of this Agreement.
7.  MISCELLANEOUS. You shall comply with all applicable export laws, restrictions and regulations in connection with your use of the Software, and will not export or re-export the Software in violation thereof. This Agreement is personal to you and you shall not assign or transfer the Agreement or the Software to any third party under any circumstances; Company may assign or transfer this Agreement without consent. This Agreement represents the complete agreement concerning this license between the parties and supersedes all prior agreements and representations between them. It may be amended only by a writing executed by both parties. If any provision of this Agreement is held to be unenforceable for any reason, such provision shall be reformed only to the extent necessary to make it enforceable. This Agreement shall be governed by and construed under California without regard to any conflicts of law provisions thereof.

2W 5V High Linearity Amplifier

The TQP7M9106 is a 2W 5V high-linearity driver amplifier in a standard 4x4mm QFN package. At 0.9 GHz, the TQP7M9106 offers 20.8 dB gain, ultra-high 50 dBm OIP3, and +33 dBm of compressed 1dB power while drawing 455 mA current. Internal circuitry allows the amplifier to offer 'Class A' linearity performance with 'Class AB' efficiency. The TQP7M9106 contains added patented features implemented on-chip that differentiates it from other products in the market. The amplifier contains RF overdrive protection allowing the device to be very rugged. The internal active bias allows the amplifier to operate off of a 5V supply but also provides DC overvoltage protection. This protects the amplifier from electrical DC voltage surges and high input RF input power levels that may occur in a system. On-chip ESD protection allows the amplifier to have a very robust Class 1C HBM ESD rating. The device is housed in a lead-free / green / RoHS-compliant, industry-standard 4x4mm QFN surface-mount package. The device is ideal for 3G / 4G small cell base stations, high power amplifiers, repeaters, Defense communications, or any other general wireless application in the 50-1500 MHz frequency range

Qorvo, Amplifier, TQP7M9106, RFMW (RFMW)

Pricing

Qty	Price
1 - 24	$18.79
25 - 99	$14.98
100 - 249	$12.36
250 - 499	$10.30
500 - 999	$8.80

Add	Part Function	Part Number	Description
Invalid Qty	Evaluation Board	TQP7M9106-PCB900	Evaluation board for TQP7M9106, 920- 960 MHz
Invalid Qty	Complementary Product	TQP7M9104	Amplifier, High Linearity, 0.7- 4 GHz, 32.8 dBm, 15.8 dB, 49.5 dBm OIP3

Qty Invalid Qty

Availability

Available: 5002

Call for Delivery or Get a Quote

Qty

Invalid Sample Qty

Also Available

Part Function	Part Number	Description
Evaluation Board	TQP7M9106-PCB900 Qorvo	Evaluation board for TQP7M9106, 920- 960 MHz
Complementary Product	TQP7M9104 Qorvo	Amplifier, High Linearity, 0.7- 4 GHz, 32.8 dBm, 15.8 dB, 49.5 dBm OIP3

Manufacturer:
Part Number:
Description:
Quantity:
Unit Price:

Items in the cart:
Subtotal:

TQP7M9106

Amplifier from Qorvo

Amplifier, High Linearity, .05- 1.5 GHz, 33 dBm, 20.8 dB

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW

GLOBAL SALES

TQP7M9106

Amplifier from Qorvo

Amplifier, High Linearity, .05- 1.5 GHz, 33 dBm, 20.8 dB

Software Terms & Conditions

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW