Home>> Battery Management Device>> ACT2823QJ-T1000

ACT2823QJ-T1000

Model Number: ACT2823

Battery Management Device from Qorvo

5 V, 2.4 A Dual Cell Battery Power Manager

Status: Discontinued | Data Sheet:

| RoHS Compliance: Rohs Compliant

Overview

Qorvo’s ACT2823 is a high-performance, low-profile battery management IC that enables the smallest size solutions for backup battery packs and standalone battery chargers without the need for cell balancing. Each solution can be implemented with a single ACT2823 IC.

The product integrates all the functions that a backup battery pack needs, including switching charger, boost converter and LED indication. The product also includes an input to obtain user feedback (for example, via a push button), to support various user-interface functions such as turn on/off charging and query charging status. The IC supports LED indication to display charging level on 4 LEDs.

ACT2823 operates at 400 kHz for switching charger and 400 kHz for boost converter allowing tiny external inductor and capacitors. ACT2823 provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached.

The product charges the battery with the full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110 °C with charge current foldback. The product’s boost converter steps battery voltage up to 5 V. The boost converter features high efficiency, constant current regulation, short circuit protection and over-voltage protection.

Key Features

Dedicated single chip solution for mobile power with minimal component count
Dual cell battery charger
3.3 A output with constant current (CC) regulation
USB auto-detection supports USB BC1.2, Apple and Samsung devices, and Chinese YD/T 1591-2009
5.07 V +/- 1% output with prioritized power path from input to output
8.4 V / 8.7 V +/- 0.5% battery charge voltage accuracy
I2C interface for optimal system performance and status reporting
Output plug-in detection and wakeup from sleep mode
10 mA no load detection and shut-off
4 LED battery level indication
4 modes of fuel gauge LED indication
< 10uA low battery drain current
> 92% charge and discharge efficiency at 3.3 A output for full battery range
Sophisticated battery protection

Typical Applications

Backup Battery Packs
Power Banks
Mobile Power
Standalone Battery Chargers with USB Output
Bluetooth Speakers

Part Number: ACT2823QJ-T1000
Manufacturer: Qorvo
Charger Topology: Boost
Battery Cell: Dual Cell
Input Voltage (V): 4.5 - 5.5
Max Charge Current: 1.8 A
Built-In LDO Regulator: 5 V / 50 mA
USB On-The-Go (OTG): Yes
Max OTG Current: 3.4 A
OTG Output Auto-Detection: Yes
Battery Cell Balancing: No
Interface: I2C
ADC: No
Package Type: 40-pin, QFN
Package: 5 x 5 mm

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Part Function	Part Number	Description
Evaluation Board	EA2823QJ-T1000 Qorvo	ACT2823QJ-T1000 EVK
Evaluation Board	EA2823QJ-T1435 Qorvo	ACT2823QJ-T1435 EVK

Technical Inquiry Request for ACT2823QJ-T1000 Battery Management Device

Fields marked with * are required.

Product Specifications For ACT2823QJ-T1000 Battery Management Device

Part Number: ACT2823QJ-T1000 Manufacturer: Qorvo Product Description: 5 V, 2.4 A Dual Cell Battery Power Manager

Design Information

* Project:

* Application:

Production Date:

Additional Requirements:

Contact Information

* Email Address:

* Phone Number:

*First Name:

* Last Name:

* Company Function:

* Company:

Job Title:

* Country:

* Zip / Postal Code:

* City:

* State or Province:

Availability

In Stock

Need products sooner?

Request a Delivery Quote

Pricing

Pricing Available Upon Request. Request a Pricing Quote

Product Notices

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Description	Units Per Format	Available

Description	Units Per Format	Available

BY CLICKING ON THE "ACCEPT" BUTTON, “YOU” (MEANING YOU PERSONALLY OR THE COMPANY YOU REPRESENT AND ON WHOSE BEHALF YOU ARE FULLY AUTHORIZED TO ENTER THIS AGREEMENT) ARE CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE "CANCEL" BUTTON AND THE DOWNLOAD/INSTALLATION PROCESS WILL NOT CONTINUE.  IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO THESE TERMS.
1.  GRANT. Subject to the terms of this Agreement, ("Company") hereby grants you (and only you) a limited, personal, non-sublicensable, non-transferable, royalty-free, nonexclusive license to use internally the software that you are about to download/install ("Software") only in accordance with this Agreement and the Company documentation that accompanies the Software and without any modification other than modifications provided directly from Company.
2.  RESTRICTIONS. You may not (and agree not to, and not authorize or enable others to), directly or indirectly: (a) copy, distribute, or otherwise use for the benefit of a third party, the Software; (b) disassemble, or otherwise reverse engineer, the Software; or (c) remove any proprietary notices from the Software. You understand that Company may modify or discontinue offering the Software at any time.
3.  SUPPORT AND UPGRADES. This Agreement does not entitle you to any support, upgrades, patches, enhancements, or fixes for the Software (collectively, "Support"). Any such Support for the Software that may be made available by Company shall become part of the Software and subject to this Agreement.
4.  WARRANTY DISCLAIMER. COMPANY PROVIDES THE SOFTWARE "AS IS" AND WITHOUT WARRANTY OF ANY KIND, AND COMPANY HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY, AND NON-INFRINGEMENT. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS AGREEMENT.
5.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, WITHOUT LIMITATION, TORT, CONTRACT, STRICT LIABILITY, OR OTHERWISE, SHALL COMPANY OR ITS LICENSORS, SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR ANY OTHER PERSON FOR (A) ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER FAILURE OR MALFUNCTION, DAMAGES RESULTING FROM YOUR USE OF THE SOFTWARE OR (B) ANY AMOUNT IN EXCESS OF $100.
6.  TERMINATION. You may terminate this Agreement and the license granted herein at any time by destroying or removing from all computers, networks, and storage media all copies of the Software. Company may terminate this Agreement and the license granted herein immediately if you breach any provision of this Agreement. Upon receiving notice of termination from Company you will destroy or remove from all computers, networks, and storage media all copies of the Software. Sections 2 through 7 shall survive termination of this Agreement.
7.  MISCELLANEOUS. You shall comply with all applicable export laws, restrictions and regulations in connection with your use of the Software, and will not export or re-export the Software in violation thereof. This Agreement is personal to you and you shall not assign or transfer the Agreement or the Software to any third party under any circumstances; Company may assign or transfer this Agreement without consent. This Agreement represents the complete agreement concerning this license between the parties and supersedes all prior agreements and representations between them. It may be amended only by a writing executed by both parties. If any provision of this Agreement is held to be unenforceable for any reason, such provision shall be reformed only to the extent necessary to make it enforceable. This Agreement shall be governed by and construed under California without regard to any conflicts of law provisions thereof.

ACT2823QJ-T1000

Battery Management Device from Qorvo

5 V, 2.4 A Dual Cell Battery Power Manager

Technical Inquiry Request for ACT2823QJ-T1000 Battery Management Device

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW

GLOBAL SALES

ACT2823QJ-T1000

Battery Management Device from Qorvo

5 V, 2.4 A Dual Cell Battery Power Manager

Technical Inquiry Request for ACT2823QJ-T1000 Battery Management Device

Software Terms & Conditions

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW