Home>> Intelligent Motor Controller>> PAC5210QS

PAC5210QS

Model Number: PAC5210

Intelligent Motor Controller from Qorvo

600 V IPM Controller

Status: Standard | Data Sheet:

| RoHS Compliance: Rohs Compliant

Overview

Qorvo’s PAC5210 belongs to Qorvo’s Power Application Controller® (PAC) product family. This family features highly-optimized SOC devices that can implement a BLDC or PMSM programmable motor controller and driver in a single integrated IC.

The product integrates a FLASH-based MCU, Power Management, open-drain drivers and signal-conditioning components in a single product. PAC5210 is optimized toward high-power IPM-based inverter systems.

This product contains a 50MHz Arm® Cortex®-M0 with 32kB of FLASH that can be used to implement high-performance motor control and supervisory applications. The MCU also contains motor control peripherals such as 10b 1MSPS dual auto-sequencer ADC and PWM timers with hardware dead-time insertion. The Multi-Mode Power Manager™ (MMPM) contains a 600V Flyback DC/DC controller and power management components for powering the IC and other PCB system power supplies. The Application-Specific Power Drivers™ provide integrated open-drain drivers for driving external relay devices. The Configurable Analog Front-End™ (CAFE) provides signal-chain components such as differential and single-end amplifiers, comparators and DACs.

Key Features

Fully programmable 32-bit microcontroller
Integrated DC/DC flyback controller
Integrated 23 V / 40 mA open-drain drivers
Integrated 3.3 V / 5 V PWM
Integrated PGA (3 differential, 4 single-ended)
Integrated DACs and comparators
UART, I2C and SPI serial interfaces
Extremely low power total hibernate mode
Minimal external components

Typical Applications

Power Tools
Garden Tools
White Goods
Embedded Speed Controllers
General Purpose Motor Controllers

Part Number: PAC5210QS
Manufacturer: Qorvo
Power Supply Input Voltage: 5.2 - 52 V
Power Supply Topology: 600 V AC/DC Flyback
Gate Drivers (Open-Drain): 3 @ 23 V / 40 mA
Microcontroller: 50 MHz ARM® Cortex®-M0
MCU Flash: 32 KB
MCU SRAM: 8 KB
MCU ADC: 10b, 1MSPS SAR
MCU GPIOs: 37
MCU PWMs: 14
Serial Interfaces: I2C, UART/SPI
Signal Chain Diff Amps: 3
Signal Chain Single Amps: 4
Signal Chain ADC Channels: 11
Package Type: 56-pin, TQFN
Package: 8 x 8 mm

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Technical Inquiry Request for PAC5210QS Intelligent Motor Controller

Fields marked with * are required.

Product Specifications For PAC5210QS Intelligent Motor Controller

Part Number: PAC5210QS Manufacturer: Qorvo Product Description: 600 V IPM Controller

Design Information

* Project:

* Application:

Production Date:

Additional Requirements:

Contact Information

* Email Address:

* Phone Number:

*First Name:

* Last Name:

* Company Function:

* Company:

Job Title:

* Country:

* Zip / Postal Code:

* City:

* State or Province:

Availability

In Stock

Need products sooner?

Request a Delivery Quote

Pricing

Quantity

Price

1 - 24

$5.17

25 - 99

$4.62

100 - 249

$4.11

Request a Pricing Quote for greater quantities

Product Notices

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Description	Units Per Format	Available

Description	Units Per Format	Available

BY CLICKING ON THE "ACCEPT" BUTTON, “YOU” (MEANING YOU PERSONALLY OR THE COMPANY YOU REPRESENT AND ON WHOSE BEHALF YOU ARE FULLY AUTHORIZED TO ENTER THIS AGREEMENT) ARE CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE "CANCEL" BUTTON AND THE DOWNLOAD/INSTALLATION PROCESS WILL NOT CONTINUE.  IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO THESE TERMS.
1.  GRANT. Subject to the terms of this Agreement, ("Company") hereby grants you (and only you) a limited, personal, non-sublicensable, non-transferable, royalty-free, nonexclusive license to use internally the software that you are about to download/install ("Software") only in accordance with this Agreement and the Company documentation that accompanies the Software and without any modification other than modifications provided directly from Company.
2.  RESTRICTIONS. You may not (and agree not to, and not authorize or enable others to), directly or indirectly: (a) copy, distribute, or otherwise use for the benefit of a third party, the Software; (b) disassemble, or otherwise reverse engineer, the Software; or (c) remove any proprietary notices from the Software. You understand that Company may modify or discontinue offering the Software at any time.
3.  SUPPORT AND UPGRADES. This Agreement does not entitle you to any support, upgrades, patches, enhancements, or fixes for the Software (collectively, "Support"). Any such Support for the Software that may be made available by Company shall become part of the Software and subject to this Agreement.
4.  WARRANTY DISCLAIMER. COMPANY PROVIDES THE SOFTWARE "AS IS" AND WITHOUT WARRANTY OF ANY KIND, AND COMPANY HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY, AND NON-INFRINGEMENT. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS AGREEMENT.
5.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, WITHOUT LIMITATION, TORT, CONTRACT, STRICT LIABILITY, OR OTHERWISE, SHALL COMPANY OR ITS LICENSORS, SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR ANY OTHER PERSON FOR (A) ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER FAILURE OR MALFUNCTION, DAMAGES RESULTING FROM YOUR USE OF THE SOFTWARE OR (B) ANY AMOUNT IN EXCESS OF $100.
6.  TERMINATION. You may terminate this Agreement and the license granted herein at any time by destroying or removing from all computers, networks, and storage media all copies of the Software. Company may terminate this Agreement and the license granted herein immediately if you breach any provision of this Agreement. Upon receiving notice of termination from Company you will destroy or remove from all computers, networks, and storage media all copies of the Software. Sections 2 through 7 shall survive termination of this Agreement.
7.  MISCELLANEOUS. You shall comply with all applicable export laws, restrictions and regulations in connection with your use of the Software, and will not export or re-export the Software in violation thereof. This Agreement is personal to you and you shall not assign or transfer the Agreement or the Software to any third party under any circumstances; Company may assign or transfer this Agreement without consent. This Agreement represents the complete agreement concerning this license between the parties and supersedes all prior agreements and representations between them. It may be amended only by a writing executed by both parties. If any provision of this Agreement is held to be unenforceable for any reason, such provision shall be reformed only to the extent necessary to make it enforceable. This Agreement shall be governed by and construed under California without regard to any conflicts of law provisions thereof.

PAC5210QS

Intelligent Motor Controller from Qorvo

600 V IPM Controller

Technical Inquiry Request for PAC5210QS Intelligent Motor Controller

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW

GLOBAL SALES

PAC5210QS

Intelligent Motor Controller from Qorvo

600 V IPM Controller

Technical Inquiry Request for PAC5210QS Intelligent Motor Controller

Software Terms & Conditions

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW