Home>> Front-End Module>> QPB9319

QPB9319

Model Number: QPB9319

Front-End Module from Qorvo

Front End Module, LNA Module, 1.8 to 4.2 MHz, 37.7 dB, SMT, 44 Pin, 7 x 7

Status: Discontinued | Data Sheet:

| RoHS Compliance: Rohs Compliant

The Qorvo QPB9319 is a highly integrated front-end module targeted for TDD base stations. The switch LNA module integrates a two-stage LNA and a high power switch in a dual channel configuration. The second stage LNA is capable of going into a bypass mode. Power down and bypass capability for the LNAs can be controlled with control pins on the module.

The QPB9319 can be utilized across the 1.8 – 4.2 GHz range to provide 1.45 dB noise figure for operation in the receive mode and 0.7 dB insertion loss in the transmit mode at 2.7GHz. The LNAs utilize Qorvo’s high performance E-pHEMT process while the SOI technology based switch supports input RF power signals of up to 5W average power assuming 8 dB PAR. The product only needs a +5 V supply to operate the high power switch and the LNAs.

The QPB9319 is packaged in a RoHS-compliant, compact 7 mm x 7 mm surface-mount leadless package. The switch LNA module is targeted for wireless infrastructure applications configured for TDD-based MIMO architectures. The module can be used for next generation 5G or pre-5G solutions or small cell base-station applications.

Key Features:

1.8 - 4.2 GHz Frequency Range
Dual channel
Second LNA has bypass mode
Max RF input power = 8W (8db PAR), TX Mode
37 dB Gain (RX mode, High Gain state)
19 dB Gain (RX mode, Low-gain state)
+34 dBm OIP3 (RX mode, High gain state)
29.5 dBm OIP3 (RX mode, Low-gain state)
1.8 V TTL logic compatibility on Ctrl lines
3 - 5 V operation for switch and LNAs
Compact size, 7 x 7mm

Part Number: QPB9319
Manufacturer: Qorvo
Frequency Min: 1800 MHz
Frequency Max: 4200 MHz
Rx Gain: 37.7 dB
Rx NF: 1.45 dB
Voltage Max: 5 V
OP1dB: 19.5 dBm

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Part Function	Part Number	Description
Replacement	QPB9378 Qorvo	FEM, 2.3 to 5.0 GHz, 34 dB, 20 dBm, 40 Pin 6 x 6 mm Leadless SMT Pkg

Technical Inquiry Request for QPB9319 Front-End Module

Fields marked with * are required.

Product Specifications For QPB9319 Front-End Module

Part Number: QPB9319 Manufacturer: Qorvo Product Description: Front End Module, LNA Module, 1.8 to 4.2 MHz, 37.7 dB, SMT, 44 Pin, 7 x 7

Design Information

* Project:

* Application:

Production Date:

Additional Requirements:

Contact Information

* Email Address:

* Phone Number:

*First Name:

* Last Name:

* Company Function:

* Company:

Job Title:

* Country:

* Zip / Postal Code:

* City:

* State or Province:

Availability

In Stock

Need products sooner?

Request a Delivery Quote

Pricing

Pricing Available Upon Request. Request a Pricing Quote

Product Notices

Tariff Notice

Product may be included on Section 301 Tariff List and subject to applicable tariff charges.

Description	Units Per Format	Available

Replacement Part(s) Suggested

The part QPB9319 is discontinued, below is the suggested replacement part.

Part Number	Manufacturer	Description
QPB9378	Qorvo	FEM, 2.3 to 5.0 GHz, 34 dB, 20 dBm, 40 Pin 6 x 6 mm Leadless SMT Pkg

Description	Units Per Format	Available

The part QPB9319 is discontinued, would you like to check out the suggested replacement part?

Part Function	Part Number	Description
Replacement	QPB9378 Qorvo	FEM, 2.3 to 5.0 GHz, 34 dB, 20 dBm, 40 Pin 6 x 6 mm Leadless SMT Pkg

BY CLICKING ON THE "ACCEPT" BUTTON, “YOU” (MEANING YOU PERSONALLY OR THE COMPANY YOU REPRESENT AND ON WHOSE BEHALF YOU ARE FULLY AUTHORIZED TO ENTER THIS AGREEMENT) ARE CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE "CANCEL" BUTTON AND THE DOWNLOAD/INSTALLATION PROCESS WILL NOT CONTINUE.  IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO THESE TERMS.
1.  GRANT. Subject to the terms of this Agreement, ("Company") hereby grants you (and only you) a limited, personal, non-sublicensable, non-transferable, royalty-free, nonexclusive license to use internally the software that you are about to download/install ("Software") only in accordance with this Agreement and the Company documentation that accompanies the Software and without any modification other than modifications provided directly from Company.
2.  RESTRICTIONS. You may not (and agree not to, and not authorize or enable others to), directly or indirectly: (a) copy, distribute, or otherwise use for the benefit of a third party, the Software; (b) disassemble, or otherwise reverse engineer, the Software; or (c) remove any proprietary notices from the Software. You understand that Company may modify or discontinue offering the Software at any time.
3.  SUPPORT AND UPGRADES. This Agreement does not entitle you to any support, upgrades, patches, enhancements, or fixes for the Software (collectively, "Support"). Any such Support for the Software that may be made available by Company shall become part of the Software and subject to this Agreement.
4.  WARRANTY DISCLAIMER. COMPANY PROVIDES THE SOFTWARE "AS IS" AND WITHOUT WARRANTY OF ANY KIND, AND COMPANY HEREBY DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY, AND NON-INFRINGEMENT. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS AGREEMENT.
5.  LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, WITHOUT LIMITATION, TORT, CONTRACT, STRICT LIABILITY, OR OTHERWISE, SHALL COMPANY OR ITS LICENSORS, SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR ANY OTHER PERSON FOR (A) ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER FAILURE OR MALFUNCTION, DAMAGES RESULTING FROM YOUR USE OF THE SOFTWARE OR (B) ANY AMOUNT IN EXCESS OF $100.
6.  TERMINATION. You may terminate this Agreement and the license granted herein at any time by destroying or removing from all computers, networks, and storage media all copies of the Software. Company may terminate this Agreement and the license granted herein immediately if you breach any provision of this Agreement. Upon receiving notice of termination from Company you will destroy or remove from all computers, networks, and storage media all copies of the Software. Sections 2 through 7 shall survive termination of this Agreement.
7.  MISCELLANEOUS. You shall comply with all applicable export laws, restrictions and regulations in connection with your use of the Software, and will not export or re-export the Software in violation thereof. This Agreement is personal to you and you shall not assign or transfer the Agreement or the Software to any third party under any circumstances; Company may assign or transfer this Agreement without consent. This Agreement represents the complete agreement concerning this license between the parties and supersedes all prior agreements and representations between them. It may be amended only by a writing executed by both parties. If any provision of this Agreement is held to be unenforceable for any reason, such provision shall be reformed only to the extent necessary to make it enforceable. This Agreement shall be governed by and construed under California without regard to any conflicts of law provisions thereof.

QPB9319

Front-End Module from Qorvo

Front End Module, LNA Module, 1.8 to 4.2 MHz, 37.7 dB, SMT, 44 Pin, 7 x 7

Technical Inquiry Request for QPB9319 Front-End Module

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW

GLOBAL SALES

QPB9319

Front-End Module from Qorvo

Front End Module, LNA Module, 1.8 to 4.2 MHz, 37.7 dB, SMT, 44 Pin, 7 x 7

Technical Inquiry Request for QPB9319 Front-End Module

Software Terms & Conditions

Products

Manufacturers

Support

Accreditations

Subscribe to Our Newsletter

Connect

Contact

Join Our Team!

About RFMW