The Qorvo® QPF7607 is an integrated high power front end module (iFEM) designed for Wi-Fi 7 (802.11be) systems. This iFEM integrates bandBoost technology to create an easier to use and extremely compact solution for Wi-Fi tri-band applications where operating in two radios simultaneously within the 5 GHz and 6 GHz frequency band is needed. The small form factor and integrated matching minimizes layout area in the application.
Performance is focused on optimizing the PA for a 5V supply voltage, while providing optional operation over a wide range, that conserves power consumption while maintaining the highest linear output power and leading edge throughput. Qorvo bandBoost technology is integrated to allow operation in U-NII 5-8 while reducing out of band power in U-NII 1-3 to a level that is appropriate for use on the same board. Receive path matches the optimal technologies to maximize Rx sensitivity through noise figure performance that is consistent over a wider variety of conditions.
Integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation are included. For application feedback, a DC and RF power detector is integrated in the package providing a proportional voltage and RF for a given output power from the transmit path.
The QPF7607 integrates a 6 GHz power amplifier (PA), U-NII 5-8 bandBoost BAW filter, single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device.
Part Number:
QPF7607
|
Manufacturer:
Qorvo
|
Sub Type:
WiFi
|
Frequency Min:
5945 MHz
|
Frequency Max:
7125 MHz
|
Rx Gain:
12 dB
|
Rx NF:
3.4 dB
|
Tx Gain:
29 dB
|
Voltage Min:
5 V
|
OP1dB:
29 dBm
|
Description | Units Per Format | Available |
Description | Units Per Format | Available |